| Year 2023-24 |
|
⮞ Dr. Kedar K Patil, (2023) “Tribological study of eco-friendly banana fober epoxy resin composite: An alternative solution over artificial composite ” 13th India-Japan Science and Technology Conclave: International Conference On Frontier Areas Of Science And Technology (ICFAST-2023) |
| Year 2021-22 |
|
⮞ Dr. S. J. Raykar, Mr. Y. G. Chaugule, Mr. V. I. Pasare, Mr. D. A. Sawant, Mr. U. N. Patil (2021) “Analysis of Micro hardness And Degree of Work Hardening(DWH) while Turning Inconel 718 With High Pressure Coolant Environment”2021 Third International Conference on Recent Advances in Materials & Manufacturing (ICRAMM 2021) ⮞ Dr. S. J. Raykar( 2021) “Coplex Proportional Assessment (COPRAS) based Multiple Criteria Decision Making (MCDM) Paradigm for Hard Turning Process Parameter” 2021 Third International Conference on Recent Advances in Materials & Manufacturing (ICRAMM 2021) ⮞ Dr. S. J. Raykar, Mr. Y. G. Chaugule, Mr. V. I. Pasare, Mr. D. A. Sawant, Mr. U. N. Patil (2021) “Analysis Process Parameter of 3D Printing for Surface finish, Printing Time and Tensile”2021 Third International Conference on Recent Advances in Materials & Manufacturing (ICRAMM 2021) |
|
Year 2023-24 |
|
⮞ Dr. Sunil J Raykar, Mr. Dipak A Sawant (2023) “Post processing techniques used toimprovethe quality of 3D printed parts using FDM: State of art review and experimentalwork” Materials Today: Proceedings (https://doi.org/10.1016/j.matpr.2023.09.202) ⮞ Dr.Kedar K Patil(2023) “An experimental and finite element investigation for determining critical speeds of a cracked jeffcott rotor model” Noise & Vibration Worldwide (https://doi.org/10.1177/09574565231203259) ⮞ Dr.Kedar K Patil “Effect of material on critical speed of rotor system with varyingload”Materials Today: Proceedings (https://doi.org/10.1016/j.matpr.2023.10.036) ⮞ Dr.Kedar K Patil “An experimental and FEA approach to investigate effect of cracks on a rotor bearing system” Materials Today: Proceedings (https://doi.org/10.1016/j.matpr.2023.10.015) ⮞ Dr.Kedar K Patil “Tribological study of Eco Friendly Banana fober Epoxy Resin Composites : An Alternative solution over artificial Composites” ICFAST-2023 Conference Proceedings, Shivaji University Kolhapur. ⮞ Mr. Nilesh T Mohite “Comparative Analysis of WEDM Performance of Nitronic30 using Different wire electrodes materials” International Journal Machining and Machiniablity of Materials |
|
Year 2022-23 |
|
⮞ Dr. Sunil J Raykar,(Jan-2023) “Investigation & Analysis of Effect of Curing Process on compressive strength performance of steriolithography-printed components”, Journal of Materials Engineering and Performance (http://dx.doi.org/10.1007/s11665-023-07820-w) ⮞ Dr. Sunil J Raykar(July-2022) “Multiobjective Optimization and Analysis of Used Fused Deposition Modelling Parameters Based Infilled Patterns”, INT.J.Six and compitative advantage (http://dx.doi.org/10.1504/IJSSCA.2022.124295) ⮞ Dr. Sunil J Raykar(July-2022) “ Mechanical and Corrosion Behaviour of AI5083 Alloy Processed by Muti-directional Forging at Cryogenic Temperature”,Optimization of Industrial Systems( https://doi.org/10.1002/9781119755074.ch37) ⮞ Dr. Sunil J Raykar (June-2022) “Influence of Processing and Microstructure on the corrosion behaviour of Ultra fine Grained AI5083 Alloy”, Materials Today(https://doi.org/10.1177/09544089221101370) ⮞ Shubhdha S Warke(June-2022)”Comparison of Energy Consumption of ABS and PLA while 3D printing with fused deposition modelling Process”, Materials Today(https://doi.org/10.1016/j.matpr.2022.05.509) ⮞ Mohite, N. T. (2023). Reclamation of Waste Sand Generated from 3D Printer. International Journal of Metalcasting, 1-13. (https://doi.org/10.1007/s40962-023-00991-1) |
|
Year 2021-22 |
|
⮞ Dr. Sunil J Raykar“Machining performance analysis of Turning of Inconel 718 under different coolant environment ” Indian Journal of Engineering & Material Science, (http://op.niscpr.res.in/index.php/IJEMS/article/view/46052) ⮞ Dr. Sunil J Raykar, Yogesh G.Chaugule, Viraj I.Pasare, Dipak A.Sawant, Utkarsh N.Patil “Analysis of microhardness and degree of work hardening (DWH) while turning Inconel 718 with high pressure coolant environment” Materials Today Proceeding (https://doi.org/10.1016/j.matpr.2022.02.426) ⮞ Dr. Sunil J Raykar, Pooja Patil, Dharmendrasingh, JaiprkashBhamu “Multi objective optimisation and analysis of used fused deposition modelling parameters: best infill patterns” Int. J. Six and Compattive Advantage, (http://dx.doi.org/10.1504/IJSSCA.2022.124295) ⮞ Nilesh t mohite, “Performance enhancement in WEDM of nitronic-30 using latent heat energy ” Indian Academy of Science (https://doi.org/10.1007/s12046-022-01852-z Sadhana(0123456789().,volV)FT3](0123456789().,-volV) ⮞ Dr. Sunil J Raykar, Pooja PatilJaiprakashBhamu “Modeling and analysis of surface roughness in fused deposition modeling based on infill patterns” Indian Journal of Engineering & Material Science (http://op.niscpr.res.in/index.php/IJEMS/article/view/45585) ⮞ Mohite, N. T., Patil, G. V., &Kallol, A. N. (2022). “The use of entropy-based GRA approach to analyze and optimize the wire electrical discharge machining process for Nitronic-30.” Materials Today: Proceedings, 49, 1426-1430. (https://doi.org/10.1016/j.matpr.2021.07.133) ⮞ Dr.Anantkumar J. Gujar, AadityaSurve, ManavPatil, UddeshPatole, ShubhamTapkire, “Application of Lean manufacturing techniques in various sectors: A case study” International Journal of Research in Engineering and Science (IJRES) (https://www.ijres.org/papers/Volume-10/Issue-3/Ser-7/A10030105.pdf) ⮞ Gujar AnantkumarJotiram , Prakash , Arun , NithyaDorairajan , Gopala Rao &Manikandan. R “Design-based systems engineering an application for product manufacturing” Journal of optoelectronics laser ⮞ Gujar AnantkumarJotiramBasanta Kumar PalaiSumanta Bhattacharya S Aravinth G. Gnanakumar Ram SubbiahMakendranChandrakas “Investigating Mechanical Strength of a Natural Fibre Polymer Composite using SiO2 Nano-filler” Materials Today Proceeding(https://doi.org/10.1016/j.matpr.2022.01.176) ⮞ Avinash N. Khadtare, Raju S. Pawade, Suhas S. Joshi “Analysis of drilling thrust for straight and inclined micro-hole in thermal barrier coated inconel 718 superalloy” Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition IMECE2021 (http://dx.doi.org/10.1115/IMECE2021-69145) ⮞ Shankar VitthalKodate, PragadaSatyanarayana Raju, Ajay Kumar Yadav, G.N. Kumar “Effect of fuel preheating on performance, emission and combustion characteristics of a diesel engine fuelled with Vateriaindica methyl ester blends at various loads” Journal of Environmental Management 304 (2022) 114284 (https://doi.org/10.1016/j.jenvman.2021.114284) ⮞ Shankar VitthalKodate, PragadaSatyanarayana Raju, Ajay Kumar Yadav , G.N. Kumar “Investigation of preheated Dhupa seed oil biodiesel as an alternative fuel on the performance, emission and combustion in a CI engine” Energy 231 (2021) 120874 (https://doi.org/10.1016/j.energy.2021.120874) |
|
Year 2023-24 |
|
⮞ Printed Circuit Board Manufacturing Setup (2023),Mr. P.B.Nandgave, DYPCET,14000, one year ⮞ Design and development of food serving robot (2023), Dr. S. J. Raykar, DYPCET,28000,one year ⮞ Vibration analysis of shaft using Artificial Neural Network (2023),Dr. K. K. Patil, DYPCET,10000, One year ⮞ Design and development of oil skimming machine (2023),Mr. D.A Sawant, DYPCET,5000, one year ⮞ Design and development of Automated Storage and Retrieval system for library(2023) , Mr. N. T. Mohite, DYPCET,9000,one year ⮞ 3D Printed filament extrusion machine (2023) Mr. P. B. Nandgave, DYPCET,9000, One year ⮞ Implementation of Time Based Maintenance + Critical Spare Parts Life Monitoring (2023) Mr M. S. Shinge, Zanwar Group, One Year ⮞ Reducing Oil Consumption and Monitoring (2023) Mr. S. P. Chavan, Zanwar Group, One Year |
|
Year 2022-23 |
|
⮞ Conversion of cold room to freezer room (2022) Mr. D. N. Deomore,R V Industries, One Year ⮞ Design and Development of Fixture for leakage Testing Oil cooler cover (2022),Mr. P. A. Mane, one year ⮞ Design and Manufacturing of Pick and Place Machine of Bricks (2022) Mr. D A Sawant,one year ⮞ Finite Element Modelling and Analysis of Pressure Vessel (2022) Mr. N. T. Mohite,IdeaametricsPvt.Ltd one year ⮞ Hydraulic Jack Lifting (2022) Mr. P.D. bagade FIE Spherotech ⮞ Design and Development of Clay 3D Printer (2022), Dr.S. J. Raykar, DYPCET 40,000, One Year ⮞ Design and Development of Crop Health Monitering Drone by Using 3D Printing Technology(2022) Mr. P. B. Nandgave, DYPCET, 40,000 ,One Year ⮞ Development of 3D Printer Filament making Machine,(2022),Mr. A. R. Matkar,DYPCET,14,000, One Year |
|
Year 2023-24 |
|
⮞ Implementation of Time Based Maintenance and Critical Spare Parts Life Monitoring (2023) Zanwar Group, One Year ⮞ Reducing Oil Consumption and Monitoring (2023), Zanwar Group, One Year ⮞ Oil Consumption and Monitoring (2023), Zanwar Group, One Year ⮞ Auto detection of CI and SGI grades (2023), Zanwar Group, One Year ⮞ Tool Breakage Control(2023), Zanwar Group, One Year |
| Sr. No | Name of the Patentee | Patent Number | Title of the Patent | Year of Publishing / granting of Patent | Status |
| 1 | Dr. Sunil J. Raykar | 388122-001 | Reinforced Cement Concrete Slab Cover | 2023 | Granted |
| 2 | Dr. Sunil J. Raykar | 343373-001 | Stand for Electronic Device | 2021 | Filed |